LINUS 28
- Power
- 1.0 & 1.5 HP
- Max. flow
- 25.2 m³/h
- Max. head
- 13 m
- Solids
- 28 mm
Soiled and drainage water with fine solids and short fibres.
Use: Septic tanks, basements, foundation pits, poultry and dairy wastewater.
EKKI HOMA · Indo-German Pumping TechnologySupplied & supported by Wateria Technovation
SEWAGE | WASTEWATER | BOREHOLE | OPEN-WELL | BOOSTING
EKKI HOMA Pumps
for Water & Wastewater
German wastewater pump engineering from HOMA, combined with EKKI's Indian manufacturing and four decades of pump making. Wateria Technovation selects, supplies, installs and services EKKI HOMA sewage and wastewater pumps, together with EKKI borehole, open-well, surface and pressure boosting pumps, for STPs, ETPs, buildings, utilities and industry across India and the Middle East.
Duty Point Review · Pump Selection · Supply · Installation · Commissioning · AMC
GERMAN ENGINEERING, MADE IN INDIA
- Indo-German JVEKKI India + HOMA Germany
- Since 1981EKKI pump making
- Clean & WastewaterOne pump partner
- Made in CoimbatoreEKKI HOMA facility
- India & Middle EastSupply & service by Wateria
ABOUT EKKI HOMA
The First Indo-German Joint Venture in Wastewater Pumps
EKKI HOMA brings together HOMA Pumpenfabrik GmbH of Germany, a world leader in wastewater pumps, and the EKKI Group of Coimbatore, which has made pumps since 1981 and sells them in more than 20 countries. The joint venture makes and sells highly efficient, reliable, German-quality wastewater pumps and systems for India and neighbouring markets.
- HOMA wastewater pump technology and know-how
- EKKI manufacturing scale and Indian application knowledge
- Pumps, mixers, packaged systems and digital water solutions
- Built for corrosive, abrasive Indian sewage conditions
- Residential, commercial, industrial, OEM and municipal markets
- Local supply, installation and service through Wateria
- 1981EKKI founded
Family-owned pump maker in Coimbatore, today producing EKKI and DECCAN brand pumps from four production centres.
- 2018Joint venture signed
HOMA and EKKI formalise EKKI HOMA, with HOMA owning 50%.
- 2021Local assembly
Assembly, test and paint unit set up in Coimbatore after field trials at more than 100 sites.
- 2026LINUS Clog-Defense launch
India-made sewage pump range engineered to prevent clogging, plus an expanded Coimbatore facility.
THE RANGE
Pumps for Every Water and Wastewater Duty
From sewage lifting in a building basement to borewell water supply and constant-pressure boosting, choose a pump family to see the series and where they fit.
EKKI HOMALINUS Sewage Submersibles28 – 65 mm solids, up to 86 m³/h
HOMA TECHNOLOGYWastewater, Chopper & Cutter PumpsPumping stations, mixers, controls
EKKIBorehole Submersibles4″, 5″, 6″, 8″ and combo
EKKISubmersible Motors4″, 6″ and 8″ motors
EKKIOpen-Well SubmersiblesHorizontal and vertical
EKKICentrifugal MonoblocsESK and ESL series
EKKIJet PumpsCJS and CJD series
EKKISelf Priming PumpsSPV, SPZ, SPS and SPMS
EKKIHorizontal MultistageHM series, up to 60 m head
EKKIPressure Boosting SystemsPHM smart boosting
EKKIControls & Cables0.5 – 90 HP starters
WATERIA SERVICESelection, Installation & AMCSized and serviced locally
EKKI HOMA SEWAGE PUMPS
LINUS Clog-Defense Sewage Submersibles
Jointly engineered by EKKI and HOMA and made in India, the LINUS range is designed to prevent clogging before it occurs and to handle heavy solids and fibrous waste with fewer blockages, breakdowns and emergency call-outs.
LNCLOG-FREE · CONTINUOUS DUTY
Built for Tough Indian Sewage
LINUS pumps are built to work in the corrosive and abrasive conditions found in Indian installations, with consistent efficiency in continuous, round-the-clock operation. Advanced sealing and motor protection improve reliability, and the robust, wear-compensating design lowers energy use, maintenance and lifecycle cost.
- 28 – 65 mmSolids handling
- 86.4 m³/hMax. discharge
- 32 mMax. head
- Robust cast iron construction
- SiC mechanical seal plus radial seal
- H class insulation
- Single phase or three phase, 50 Hz
- Float switch and auto-coupling options
- Oil chamber lubricated seals (50 series)
Best for: residential complexes, commercial and institutional buildings, industrial wastewater, OEMs and municipal and decentralised sewage systems.
LINUS 30
- Power
- 1.0 – 2.0 HP
- Max. flow
- 43.2 m³/h
- Max. head
- 19 m
- Solids
- 30 – 42 mm
Soiled and wastewater with fibres and textiles.
Use: Hotels, textile wastewater, septic tanks, STP & ETP.
LINUS 48
- Power
- 1.5 HP
- Max. flow
- 36 m³/h
- Max. head
- 14.5 m
- Solids
- 50 mm
Coarse solids and fibres, float switch, auto-coupling option.
Use: Building sumps, septic tanks, STP & ETP.
LINUS 50M
- Power
- 1.0 – 6.0 HP
- Max. flow
- 86.4 m³/h
- Max. head
- 32 m
- Solids
- 50 mm
Long fibre waste, oil chamber lubricated seals.
Use: Building services, chemical and pharma effluent, STP & ETP.
LINUS 50V
- Power
- 1.0 – 6.0 HP
- Max. flow
- 65 m³/h
- Max. head
- 21 m
- Solids
- 50 – 65 mm
Large suspended solids and sludge water.
Use: Hotels, sludge, chemical and pharma effluent.
All LINUS series: 1 phase (220 – 240 V) or 3 phase (380 – 415 V), 50 Hz, H class insulation, 10 m cable. Maximum head and maximum discharge are not achieved at the same duty point.
QUICK SELECTION GUIDE
Find the Right Sewage & Wastewater Pump
Enter the flow, head and type of liquid you need to pump. Ranges whose published limits cover the duty are highlighted. Our engineers then check the pump curve, materials and installation for your site.
| Range | Brand | Type | Solids | Max. Flow | Max. Head | Motor Power | Best Use |
|---|---|---|---|---|---|---|---|
| LINUS 28 | EKKI HOMA | Cast iron submersible | 28 mm | 25.2 m³/h | 13 m | 0.75 – 1.1 kW (1 – 1.5 HP) | Septic tanks, basements, drainage |
| LINUS 30 | EKKI HOMA | Cast iron submersible | 30 – 42 mm | 43.2 m³/h | 19 m | 0.75 – 1.5 kW (1 – 2 HP) | Hotels, textile, septic tanks |
| LINUS 48 | EKKI HOMA | Cast iron submersible | 50 mm | 36 m³/h | 14.5 m | 1.1 kW (1.5 HP) | Building sumps, STP & ETP |
| LINUS 50M | EKKI HOMA | Cast iron submersible | 50 mm | 86.4 m³/h | 32 m | 0.75 – 4.5 kW (1 – 6 HP) | Long fibres, building services |
| LINUS 50V | EKKI HOMA | Cast iron submersible | 50 – 65 mm | 65 m³/h | 21 m | 0.75 – 4.5 kW (1 – 6 HP) | Sludge, hotels, industry |
| TP50 / TP53 | HOMA | Cast iron, channel or vortex | 50 – 65 mm | 82 m³/h | 31.6 m | 0.8 – 4.4 kW | Domestic sewage and drainage |
| MXS | HOMA | Cast iron, close-coupled | 80 – 100 mm | 390 m³/h | 42.2 m | Up to 43 kW (P1) | Pumping stations, STP transfer |
| Alligator OC | HOMA | Chopper pump | Chopper | 151.5 m³/h | 51.5 m | 2.9 – 19.3 kW | Coarse solids, rags, fibres |
| Barracuda GRP16 – 50 | HOMA | Cutter pump | Cutter | 27.7 m³/h | 52 m | 0.9 – 4.4 kW | Pressure sewer systems |
| Barracuda GRP56 – 111 | HOMA | Cutter pump | Cutter | 30.7 m³/h | 68 m | 6.4 – 9.5 kW | Long rising mains |
| TCV | HOMA | Stainless steel vortex | 35 – 50 mm | 28 m³/h | 12.7 m | 0.76 – 1.2 kW | Drainage and sewage |
| CTP50 / CTP70 | HOMA | Stainless steel, single channel | 50 – 70 mm | 112.5 m³/h | 31.4 m | 1.0 – 4.4 kW | Aggressive effluent |
| CMX(S) | HOMA | Stainless steel, single channel | 80 – 100 mm | 384.1 m³/h | 42.1 m | 1.3 – 19.3 kW | Aggressive sewage, industry |
| CK | HOMA | Stainless steel, multi channel | 80 mm | 400 m³/h | 31.8 m | 14.6 – 19.3 kW | Large aggressive flows |
| CH432 / CH436 | HOMA | Stainless steel drainage | 10 mm | 57.5 m³/h | 25 m | 0.7 – 2.8 kW | Aggressive drainage water |
| HP124 – 126 | HOMA | Drainage, high head | Drainage | 31 m³/h | 69 m | 6.4 – 9.5 kW | Deep basements, tunnels, sites |
| Propeller pumps | HOMA | Submersible propeller | Stormwater | 8,290 m³/h | 6.7 m | 18.5 – 160 kW | Stormwater, flood control |
LINUS data as published by EKKI; HOMA data as published by HOMA for 50 Hz. Maximum flow and maximum head are not available together in the same model. HOMA ranges are offered through EKKI HOMA; availability and lead times are confirmed with each enquiry.
HOMA WASTEWATER TECHNOLOGY
Complete Wastewater Pumping Systems
For larger flows, harder duties and complete pumping stations, EKKI HOMA brings HOMA's German range of submersible sewage pumps, chopper and cutter pumps, stainless steel pumps, mixers, packaged stations and controls.
PSSEWAGE PUMPING STATIONS
MXS Submersible Sewage & Effluent Pumps
Single-stage, close-coupled submersible pumps for surface water, sewage, effluent and sludge with soft solids, for permanent or transportable use. Two silicon carbide mechanical seals in tandem with an oil-filled seal chamber protect the motor.
- 80 – 100 mmFree passage
- 390 m³/hMax. flow
- IP68Class H motor
- Grey cast iron motor, pump and impeller
- Stainless steel motor shaft
- Thermal sensors in the winding
- 2, 4 or 6-pole motors
- ATEX explosion-proof options
- Guide rail and auto-coupling installation
Best for: municipal and township pumping stations, STP inlet and transfer, stormwater and industrial effluent.
Chopper & Cutter Pumps
Alligator OC · Barracuda GRP
Self-cleaning chopper impellers for coarse solids and fibres, and cutter pumps for pressure sewer systems up to 68 m head.
Stainless Steel Pumps
CTP · CMX(S) · CV(X) · CK · CH
For chemically aggressive drainage water and industrial effluents where cast iron would corrode.
Submersible Mixers
1.2 – 10 kW · direct drive
Keep solids in suspension in equalisation, anoxic and sludge tanks at treatment plants. Stainless steel versions available.
Packaged Pump Stations
SKB · SK10 · SK12–20 · RP10
Ready-to-install stations with synthetic sumps, pumps, pipework and backflow protection, up to 25.4 kW.
Controls & Automation
HCON · HSK · HMC · MPS · PCS DUO
Level control, duty/standby alternation, soft starters, overheating protection and alarm units.
Propeller Pumps
Up to 8,290 m³/h
Very high flows at low head for stormwater, flood control and large recirculation duties.
High-Head Drainage
HP124 – 126
Drainage pumps for heads up to 69 m, such as deep basements, tunnels and construction sites.
Monitoring
With Wateria IoT
Add level, run-hour, current and alarm monitoring with Wateria IoT Monitoring.
EKKI CLEAN WATER PUMPS
Water Supply, Irrigation & Building Services
EKKI's clean water range covers groundwater, open wells, surface transfer and pressure boosting for agriculture, homes, commercial buildings, public utilities, industry and OEMs.
BHGROUNDWATER
Borehole Submersibles & Motors
Borehole pumps and matching submersible motors for borewells and tube wells, from small domestic wells to large irrigation and utility supply.
- 4″ – 8″Bore sizes
- ComboPump + motor sets
- MotorsOil & water filled
- 4″ · 4N, 4NVR, 4J, 4S
- 5″ · 5C
- 6″ · 6C, 6CVR, 6I, 6S
- 8″ · 8C, 8S
- Combo · 54N, 54S, 67C, 68C
- Motors · M4OS, M4WC, M4WS, M6WC, M6WS, M8WC, M8WS
Best for: agriculture, borewell water supply, public utilities and industrial water intake.
OWOPEN WELLS & SUMPS
Open-Well Submersibles
EKKI is a market leader in open-well and sump submersible pumps. Horizontal and vertical versions suit open wells, sumps, tanks and rivers, with no priming and quiet operation under water.
- Horizontal6 series
- Vertical7 series
- Hori-MaxMultistage sump
- HOT
- HOK
- HOKVR
- HOS
- HOSVR
- HOM
- SUBSEVAK
- VOK
- VOS
- VOSVR
- VOM
- VOML
- VOL
Best for: irrigation, building sumps, overhead tank filling and raw water transfer.
SFSURFACE PUMPS
Monoblocs, Jet & Self Priming Pumps
Compact surface pumps for transfer, lifting and domestic supply, designed for easy handling, installation and rewinding.
- ESK · ESLCentrifugal monoblocs
- CJS · CJDJet pumps
- SP seriesSelf priming
- ESK: shield bearing and mechanical seal
- ESL: quiet, low voltage operation
- CJS: jet pumps without control valves
- SS 410 rotor shaft, bronze jet assembly
- SPV, SPZ, SPS, SPMS self priming
- Forged impellers resist wear
Best for: agriculture, homes, commercial buildings and public utilities.
PBBUILDING SERVICES
Horizontal Multistage & Pressure Boosting
The HM series horizontal multistage pumps and PHM smart boosting systems deliver steady pressure to homes and commercial buildings. For multi-pump booster sets, see our Pressure Boosting Systems.
- 0.5 – 2.0 HPHM power
- 9.6 m³/hMax. flow
- 60 mMax. head
- Uniform, adjustable water pressure
- Thermal protection
- Wide performance range
- Easy to install and maintain
- Energy efficient and reliable
- Domestic and commercial buildings
Best for: villas, apartments, hotels, hospitals, offices and shopping malls.
CPSYSTEMS
Pump Controls & Submersible Cables
Control panels that protect and monitor the pump set and extend its life, with matching submersible cables.
- 0.5 – 90 HPPower range
- 1Ø / 3Ø220 – 240 V / 380 – 415 V
- DOL · Star-DeltaStarter types
- Float switch or manual start/stop
- Dry running protection
- Cut-off on voltage fluctuation and phase loss
- Ammeter and voltmeter
- Power, run, dry-run and overload lamps
- Metal enclosure
Best for: every EKKI pump set, from single-phase domestic pumps to large three-phase installations.
APPLICATIONS
Which Pump for Which Application
A quick guide to the pump families typically used for each duty. We confirm the final selection after checking the flow, head, liquid and site conditions.
● Typically used
○ As per application
– Not typical
| Application | Typical Duty | LINUS Sewage | HOMA Sewage & Chopper | HOMA Stainless | Borehole | Open-Well | Surface Pumps | HM / PHM Boosting |
|---|---|---|---|---|---|---|---|---|
| STP & ETP | Raw sewage lifting, transfer, sludge | ● | ● | ● | – | – | – | – |
| Building Drainage & Basements | Sumps, septic tanks, basement water | ● | ● | ○ | – | ○ | – | – |
| Municipal Pumping Stations | Sewage and stormwater networks | ○ | ● | ● | – | – | – | – |
| Pressure Sewer Systems | Small flows, long rising mains | – | ● | – | – | – | – | – |
| Industrial & Aggressive Effluent | Chemical, pharma, textile, food | ○ | ● | ● | – | – | – | – |
| Stormwater & Flood Control | High flow, low head | ○ | ● | ● | – | – | ○ | – |
| Borewell Water Supply | Groundwater for homes and utilities | – | – | – | ● | – | – | – |
| Irrigation & Agriculture | Wells, canals and farm ponds | – | – | – | ● | ● | ● | – |
| Building Water Supply & Boosting | Overhead tanks, constant pressure | – | – | – | ○ | ● | ● | ● |
| OEM Skids & Packaged Plants | Package STPs, treatment skids | ● | ● | ○ | ○ | ○ | ● | ● |
ONE PARTNER FOR THE WHOLE PUMPING SYSTEM
From Duty Point to Monitored Pump Station
The right pump, installed and protected properly.
Most pump failures come from wrong selection or poor installation, not from the pump itself. We size each pump from the flow, head and liquid, then supply the pumps, guide rails, panels and pipework, commission the system and look after it under an AMC. Pumping stations can be connected to IoT monitoring, and full plants are handled by our wastewater treatment and engineering teams.
Send Your Duty Point →SELECTION
- 1Flow & Head
- 2Liquid & Solids
- 3Sump & Pipework
- 4Pump Curve Check
- ✓Duty / Standby
DELIVERY & SUPPORT
- ASupply
- BInstall
- CCommission
- DMonitor
Level, current, alarms - EAMC
Why Choose EKKI HOMA with Wateria
German Engineering
HOMA wastewater pump know-how.
Made in India
EKKI manufacturing and pricing.
Clog-Defense
Fewer blockages and call-outs.
Complete Range
Clean water to raw sewage.
Right Selection
Sized from your duty point.
Local Service
India and the UAE.
HOW WATERIA SUPPORTS YOU
From Enquiry to Long-Term Service
- 01
Requirement Review
Flow, head, liquid, sump and power details.
- 02
Pump Selection
Model, curve, materials and controls proposed.
- 03
Supply
Pumps, panels, guide rails and accessories.
- 04
Installation & Commissioning
Installed, tested and handed over with training.
- 05
AMC & Spares
Preventive maintenance, repairs and spares.
Need a Pump for Water or Sewage?
EKKI HOMA pumps, selected and serviced by Wateria.
Tell us the application, the flow and head, the liquid (clean water, sewage, effluent or drainage) and the power supply at site. Our engineers will recommend the right pump and send a techno-commercial offer.